+- OrBit Forums (https://forums.spaycetech.com)
+-- Forum: General (https://forums.spaycetech.com/forumdisplay.php?fid=1)
+--- Forum: OrBit Q&A - Ask your questions here! (https://forums.spaycetech.com/forumdisplay.php?fid=24)
+--- Thread: Incorrect VGM PIN error when programming? <SOLVED> (/showthread.php?tid=1413)
Incorrect VGM PIN error when programming? <SOLVED> - Gaboose - 08-08-2026
Hi - I'm using OrBit with a Polestar 2 on the very latest version of its OTA software (5.1.17, which doesn't even appear on the manufacturer's software info page yet -- though it deployed OTA to the car two weeks ago). Shortly after that update, I was able to connect with OrBit and push some headlight configuration changes to the car. Today, though, I tried again as I wanted to change the version of adaptive that I had chosen. I was able to connect and get basic car info (e.g., battery SOH, 12V charge, and current config), but when I tried to push a change to the car I got a "VGM PIN incorrect" error repeatedly, and could not progress. I verified that OrBit is still set up with the same PINs as I had initially put in for the VIN. Anybody know what could be going wrong and anything I could do to fix it?
<UPDATE> I had been running OrBit continuously on the ancient laptop I use for this sole purpose. Closing the app and reopening it triggered a software update check. After installing the latest version of OrBit, everything worked.
RE: Incorrect VGM PIN error when programming? <SOLVED> - jos - 08-08-2026
Ok nice, i also wrote changes today but i was already on recent Orbit version 1.3.4 and all went fine as expected.