HELP! Retrofit rear parking camera

[Kenn]

   
Volvo v60 -2021 SPA
So I bought a camera with blue back, not 360. With 4 pin connector and a cable like one from the other threads (pink angled connector and dark blue? straight connnector). The cable didnt fit so i removed the plastic housing and now there is nog plastic guidance, meaning I can turn the cable any way around in both ends. The ihu cable is mounted with the cable downwards and the camera side has the cut corner on the lower left side. 

Fitted it and changed 154 to 02 "with camera". Then I checked the cable. It was crossed in the blue and green line (pin 2 and 3). Switched the cables so its now straight. 1-1. Meaning they are installed the same in bot ends. Same pin our. I then put everything together but still no rear parking camera on screen. 

The camera symbol is in the sensus menu but no grey bar on the left side on the camera symbol )as the other symbol has in the menu)

I think I found the schematics but I need help understanding it?

Please advise. I´m going crazy here!

[IMAY2023]

There are two different types "variants" of reverse camera.
A) for (360 view) connected to the WAM module.
B) for reverse only connected to the IHU.

The cables are also different. IHU side is the same but the other end is different either goes to the WAM or reversing CAM (not 360 variant).

Make sure you purchased the correct CAM with the correct cable.
the part number for the package (cable, camera and bracket) is "32333583"
You can find the installation instructions here "https://accessories.volvocars.com/en-us/InstallationInstruction/Document/VCC-461642-33/V60(19-)/2021/T5"