Air Suspension Calibration - Printable Version +- OrBit Forums (https://forums.spaycetech.com) +-- Forum: Configuration Items (https://forums.spaycetech.com/forumdisplay.php?fid=3) +--- Forum: Chassis (https://forums.spaycetech.com/forumdisplay.php?fid=5) +--- Thread: Air Suspension Calibration (/showthread.php?tid=16) |
RE: Air Suspension Calibration - Power6 - 09-14-2023 Air Susp calibration is looking pretty good, I want the folks testing it to give me a little more feedback as I made some updates to the display and the process. Probably when you are comfortable to try lowering a bit Patridge...and then recalibrate it back to "original" and confirm that works well, I'll be ready to release it. Air Suspension Calibration - Partridge - 09-20-2023 30mm drop + sport mode Sent from my iPhone using Tapatalk RE: Air Suspension Calibration - zeba - 09-23-2023 Cool, does it also mean it sits even lower when parked (with convenient exit/entry activated)? Air Suspension Calibration - ToeJam85 - 09-24-2023 (09-20-2023, 11:16 PM)Partridge Wrote: 30mm drop + sport mode I am so stoked for this, wanna drop my T8 nice and low without bottoming it out! Is the ride any worse? Sent from my iPhone using Tapatalk RE: Air Suspension Calibration - x119 - 09-24-2023 Love to see this! Just saved yourself €2150 + Maybe the next person who does this can confirm (measure) if Offroad mode still goes to ‘MAX’ Air Suspension Calibration - Partridge - 09-25-2023 At -30mm ride quality suffers considerably. I’m going to be backing off a bit. Not sure what the official numbers are but my measurements are Off road: +40mm Comfort: +/- 0mm Eco: -5mm Sport: -10mm Easy entry: -35mm So at -30mm your Comfort setting is only 5mm higher than the old Easy Entry height. The way the lowering works is the same as using lowering links, but instead of fooling the height sensors in hardware you’re fooling them in software by spoofing the calibration. Off road mode will be lower by the same amount. This differs from the Heico system which can apparently modify each mode separately. Sent from my iPhone using Tapatalk RE: Air Suspension Calibration - zeba - 09-25-2023 Thanks Partridge for the details and comment on the ride quality. What I meant with my comment above was basically that with a -30mm lowering (from Comfort / default level), what happens then with Easy Entry..? Did you disable it or did you get to -65mm? Just wondering when something is going to be bottoming out.. Cheers Air Suspension Calibration - Partridge - 09-25-2023 (09-25-2023, 09:52 AM)zeba Wrote: Thanks Partridge for the details and comment on the ride quality. Yes, when you lower the car this way it is lower in all modes. I kept easy entry on and it definitely goes lower than normal. I think it’s close to bottoming out as my suspension is not happy backing out of my driveway slope as the car does not raise itself until after it has been in drive for a few seconds. Easy entry at -30mm setting: Sent from my iPhone using Tapatalk RE: Air Suspension Calibration - silo24 - 11-10-2023 Hi folks. Just a quick one....trying to do adjust the ride height but the button seems permanently greyed out for me......am I doing something stoopid? Thanks, Gareth Air Suspension Calibration - Partridge - 11-10-2023 (11-10-2023, 08:38 PM)silo24 Wrote: Hi folks. Hey. The feature is still in development. I’m one of the beta testers, which is why I have been posting pictures of what it can do. Sent from my iPhone using Tapatalk |