Unable to Calibrate thee 360 Camera with Orbit

[fomeir@gmail.com]

Hi everyone, 

I hope you’re all doing well!  I recently bought a used WAM from eBay and installed it along with four cameras in my 2020 XC90 PHEV. I set up configuration item 154 (Parking Camera) using option 6 for the Parking 360 Cam. The good news is that the 360 view is working, but it does need some calibration, as you can see in the photo below. 

   


I’ve been trying to calibrate the 360 camera using the Orbit service for Park Camera Calibration, but the option appears grey and I can’t activate it. I've also tried reloading the car profile and disconnecting and reconnecting to the vehicle, but no luck so far. If anyone has encountered a similar issue or 

   

has any tips to help me out, I would really appreciate it! 

Thanks so much,

 Farhat

[x119]

You're not licenced. Did you share your VIN post purchase?

[fomeir@gmail.com]

You're not licenced. Did you share your VIN post purchase?

No, I have my VIN added to my licence and added my CEM Pin as well. and I have used Orbit to upgrade to Polesatar Engineered mode. but for some reason this option is not active in my application.

[x119]

That's odd. Drop support(at)spaycetech.com an email and we'll sort.

[Pliind]

You're not licenced. Did you share your VIN post purchase?

No, I have my VIN added to my licence and added my CEM Pin as well. and I have used Orbit to upgrade to Polesatar Engineered mode. but for some reason this option is not active in my application.

You have activated Polestar Engineered theme mode. And sure some optimisations on gearbox and throttle respons but the ECU flash is not made with enabling that paramter in Orbit.