Retro Fitting the Drive Selector S/V/XC 60/90 2023

[Cuprani]

I drive a XC60 T8 Long Range (2022 onwards model).
It is produced in 2022, but its the "early 2023" model range.
Since this range, Volvo stupidly decided to remove the drive selector.

Is it possoble to retrofit the drive selector that is used in the PRE 2022 models?
Is it just a replacement of the mid console panel? Or do you have to wire it?
Is there any coding needed to let it work?

Part numbers
XC60 & V60 T6/T5/D4: 31443818
XC90 T5: 31443829
29

[Pliind]

I drive a XC60 T8 Long Range (2022 onwards model).
It is produced in 2022, but its the "early 2023" model range.
Since this range, Volvo stupidly decided to remove the drive selector.

Is it possoble to retrofit the drive selector that is used in the PRE 2022 models?
Is it just a replacement of the mid console panel? Or do you have to wire it?
Is there any coding needed to let it work?

Part numbers
XC60 & V60 T6/T5/D4: 31443818
XC90 T5: 31443829
29

You just swap it out, its the same connector as the "non-version"

And then you activate in Orbit.

[jdg0070]

Is this just for Sensus models or does this also apply to Android  based systems?