Turn signal sound and front proximity sensors is VERY muted after changed to B&W

[bas.apirak]

Hi all,

I just swap all speakers and amp from high performance to B&W on my S90 MY18. I used config wizard to change audio but unfortunately turn signal sound and front proximity sensors is VERY muted.

Could you please advice how to fix this?

Thanks.

[x119]

might be worth sharing the settings you changed..

Though i am going to guess something is up with the centre speaker.

[bas.apirak]

Hi, it is premium audio with subwof. Thanks

[Henrypanda]

Hi, it is premium audio with subwof. Thanks

Have you swapped the pins in the connectors? When I did my retrofit for my B&W, I had to swap the pins around when I swapped the amp.


Sent from my iPhone using Tapatalk

[Sodertalje]

There is a thread here that explains which pins you need to swap. Only when coming from Harman Kardon, you can do a swap without changing pins.

[xly208]

I had the exact same problem as you before and I fixed it.
What you need to do is re‑wire the mid‑range and tweeter speakers in your front doors. With a passive crossover, you’ll either hear no warning chimes at all or only very faint ones.
The center speaker also produces chimes,
so to get normal volume,
you need to make sure chimes are coming from both your doors and the center speaker.