Re-enabling Pixel lights on XC40 after 3.7 software update?

[MrMediaGuy]

Hi — In the past I had been able to enable the Pixel headlights on my XC40 simply by changing parameter 106 from "11" to "12." I never had to change the setting for 109.

This worked great until I got the latest software update at the dealership to version 3.7. Pixel headlights no longer work.  I used OrBit to change 106 back to "12," but still no love. I then did a restore to OEM settings, then changed 106 back to "12." Still nothing.

I then changed 109 to "07" (Pixel lights, US/Can setting) but still no luck. 

Has anyone successfully re-enabled Pixel functionality after the latest software updates?

Thanks!

[Sodertalje]

Hi — In the past I had been able to enable the Pixel headlights on my XC40 simply by changing parameter 106 from "11" to "12." I never had to change the setting for 109.

This worked great until I got the latest software update at the dealership to version 3.7. Pixel headlights no longer work.  I used OrBit to change 106 back to "12," but still no love. I then did a restore to OEM settings, then changed 106 back to "12." Still nothing.

I then changed 109 to "07" (Pixel lights, US/Can setting) but still no luck. 

Has anyone successfully re-enabled Pixel functionality after the latest software updates?

Thanks!

I don't know the exact setting but I thought you need to set it to ROW instead of US.

[Gruby192]

Hi, tell me if you finally managed to turn on the Pixel lights in your Volvo after the 3.7 update.

[BuiltInBelgium]

Following

[A-P]

I don't know the exact setting but I thought you need to set it to ROW instead of US.

This is correct - you just need to set config item 109 to “06” (not “07”). I just updated my North American ‘23 XC40 BEV to 3.7 and confirmed the Pixel functionality still works.