Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Headlights for trade
#1
SPA S60

I am USA based but purchased EU spec(no orange reflectors) LHD “full” headlights(bending) but cannot get past errors in orbit when trying to enable. Anyone want to trade their full us spec lights (with hcm) for these EU spec (with hcm) ?
Reply
#2
why replace them again. If your original headlight are also bendy "Full led", this means your original HCMs marked High and you just need to flash your HCMs with the current parameters of the replacement headlights Then you will need to set the correct Headlight type in the config. 
Send an email to support and follow the instructions in the main thread.
Reply
#3
(06-10-2025, 07:20 PM)IMAY2023 Wrote: why replace them again. If your original headlight are also bendy "Full led", this means your original HCMs marked High and you just need to flash your HCMs with the current parameters of the replacement headlights Then you will need to set the correct Headlight type in the config. 
Send an email to support and follow the instructions in the main thread.

My originals were not bendy, but the eu ones I got are. I have flashed the hcms and updated headlight type. I’ve also gone back and forth via email (a year ago)  but am happy to restart that conversation; maybe there’s new knowledge since then.
Reply
#4
Check your modules, if they are not labeled high, the bendy lights will not work even though the headlights are full led and you selected the correct type and flash them.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)