Retrofit Keyless Entry

[Marcp]

Hello! Thank you very much for confirming my debt. I'm leaving the pins I purchased here to help others.

- Terminal pin for CEM FL connector, original Volvo reference 30656698
- Terminal pin for CEM FO connector, verified IL-AG5-C1-5000
- Door handle connector
https://a.aliexpress.com/_EutQDTG
- Pins for the door module connector
https://a.aliexpress.com/_EQrzhXG
This one needs to be verified, but it's the same connector.
I'll confirm when I assemble it.

Thanks!

[hexaust]

How can I know if a door harness has keyless entry or not? For example this one:

[TweakeNL]

How can I know if a door harness has keyless entry or not? For example this one:

This one does have the plug for the handle. You can see it on the left side. It goes through the "door module" via that rubber grommet to the lock and the handle. (Handle is the small connector.)

[Marcp]

Please, can you help?
I can't find the fault.
Everything is assembled and connected, the handlebar lights work, but it's giving this error:

CEM: B14F5 Driver Door Handle-- General electrical failure

This weekend, I swapped the front and rear levers, replaced the handlebar connector, checked all the wiring and the CEM connector, and everything is fine.
I also want to say that the handlebar lights turn on.
I don't know what else to try...