HUD Retrofit

[ChainedAlice]

That gaping hole in the dash giving me anxiety. LOL Very cool that you were able to do this.

[Nazsky786]

Hi. Does anyone have a wiring diagram for an xc90 to retrofit the hud? 

I'm guessing it's not a ford where the connector would just be sitting there taped up.

[IMAY2023]

Hi. Does anyone have a wiring diagram for an xc90 to retrofit the hud? 

Here you go. Good lock 
https://forums.spaycetech.com/attachment.php?aid=289

[Nazsky786]

Question, if the car already has a HUD but is just the FCW version with the different colour lens is it a more simple swap just required to cut the dash?

[Nazsky786]

Is the wiring the same for the FCW led HUD to the graphical HUD and only need to add the coax cable?

Wiring shows power, ground, pwm return and power saver? 

Unless I'm looking at the wrong wiring diagram page?

[Underdog]

Decided to bite the bullet and go ahead with installation of the HUD in my RHD V90 MY18>

Have the LVDS connection on the DIM for the HUD as I recently installed the 12" DIM with this in mind.

Ordered HUD, 32233454, used.
Ordered HUD cover, 31417205, used.
Ordered (and received) LVDS cable, https://www.aliexpress.com/item/1005009111049937.html
Ordered a pigtail for the HUD power/BUS, https://www.aliexpress.com/item/1005009996252012.html

As been highlighted that having the heated windscreen (as I do) will result in a unfocused projection.
Ordered a reflective film, cheap enough to discard if ineffective once tested - https://www.ebay.ie/itm/224933638959

Obviously like to hook up the HUD before removing the dash - from the schematic, it seems to me that the HUD can basically be hooked up from the connector to the DIM.
Is my assumption correct? Or are there connections that has to go from other locations?

Does anyone have any personal notes/pictures or tips for connecting up the 8p connector for the HUD?