Retrofit Keyless Entry

[Aliaksandr]

I need to look specifically at the door handle with v60. Finding it in the trash is not so easy. Much from xc90.

Oh handle wise you can take from other models also, C40/XC40.

I usually cross reference all parts on swedish scrapyard sights and xc60 share same with v90 but i find no overlap from v60 to xc60.

Thank you!

[Aliaksandr]

How to connect the trunk opening antenna with your foot? I found this number 31419502

[paunionutz]

How to connect the trunk opening antenna with your foot? I found this number 31419502

You need wiring from foot  movement sensor to  bumper connector (ground, lin signal), and from bumper connector 1 wire to BMS (has the same LIN), and 1 wire to CEM
PS: you must buy sensor for your platform, because the braket is not the same

[Aliaksandr]

You need wiring from foot  movement sensor to  bumper connector (ground, lin signal), and from bumper connector 1 wire to BMS (has the same LIN), and 1 wire to CEM
PS: you must buy sensor for your platform, because the braket is not the same

I found a sensor with s60. I think it will fit. Can you tell me the pin numbers where to connect? Maybe you have a diagram?

[IMAY2023]

You need wiring from foot  movement sensor to  bumper connector (ground, lin signal), and from bumper connector 1 wire to BMS (has the same LIN), and 1 wire to CEM
PS: you must buy sensor for your platform, because the braket is not the same

I found a sensor with s60. I think it will fit. Can you tell me the pin numbers where to connect? Maybe you have a diagram?

https://forums.spaycetech.com/showthread...ght=wiring

[Aliaksandr]

Do we know what pins are used in the door connectors? I have everything except these pins. I do the wiring myself.

[Aliaksandr]

Here's what I found. Looks like they should work. 962943+964265-2 Contact Lira 1.2 socket + pin for wire cross-section 0.35-0.75 mm;

[Aliaksandr]

Pins for CEM FL, EN. 6206421005 (1393366-1), Contact-socket 0.5-0.75mm² for connectors of the .64 series (1-1419168-1). I used pins from OEM connector 1-1419168-1

[Aliaksandr]

Help me. Everything is assembled, I just don't know the pin numbers.

---

I have already installed the car parking. You ask. There will be more of a report further. There are many questions. I encounter them and I will tell you.

[Aliaksandr]

I drew the holder. Here is the stl antenna mount.

https://drive.google.com/file/d/1weeM6Xf...sp=sharing

---

This is the pinout.