fitting backup camera

[marinalin85]

I don't think the rear cam in these cars is a CAN module, I think it is a feed wired directly to the IHU (in cars without 360cam which have the WAM module), not sure if someone can confirm.

that would indicate it's a good chance you can simply wire up the cam and set the config with OrBit.

Rear view camera's do not have CAN. It connects directly to the IHU.  It's just an activation like many other's on Orbit. 
360 view WAM is a different story. It connects to IHU where the single backup camera connects, it also has it's own power from fuse box in the trunk. All 4 cameras are connected to WAM. 


Here is a useful link how to install many different accessories on many different volvo models.  
https://accessories.volvocars.com/en-us/...ion/Search 
I installed park assist pilot on my 2019 S60 according to the guide I found in there. I had to wire it myself because volvo no longer sells the harness.

Got all the parts for backup camera. Waiting for a sunny day to install them and I will post an update
It was hard to find the right parts due to the cable because V60 uses 1 type of cable which was 130€
But when I got the camera, I saw that it works on XC90 and XC60 as well so I looked for a cable for one of those and I found 1 at 40€. The trunk bracket for the camera was also compatible with XC90. If someone needs the part numbers, let me know