Hi,
Unfortunately, no.
New mechanic checked wirings and all and confirmed that my twice newly replaced ABS sensor is faulty.
Took his advice and replaced the front right. All was good after taking the car back last Thursday until this evening on the way home from work. The ABS/ESC and tire pressure lights came on. Actually i do feel occasional pulsating on the brake pedal since taking back my car but brushed it off as the fault lights didn’t come on.
Mechanic also mentioned that there will be a separate fault code for ABS pump if it is indeed faulty, yes no? So far, changed front right sensor 3 times, right wheel bearing and new battery, what else is there?
Below are the fault codes i scanned from Orbit,
1) C003400 - Right Front Wheel Speed Sensor
2) C003411 - Right Front Wheel Speed Sensor. General Electrical Failures. Circuit short to ground.
3) C107593 - Brake Actuator. Component Failures. NO operation.
4) C107908 - Indirect tire pressure monitoring system. Bus Signal / Message Failures
5) U230056 - Central Configuration. System Programming Failures. Invalid / incompatible configuration.
Really appreciate if someone can really point me to the correct point where this frustrating issue can be settled.
Unfortunately, no.
New mechanic checked wirings and all and confirmed that my twice newly replaced ABS sensor is faulty.
Took his advice and replaced the front right. All was good after taking the car back last Thursday until this evening on the way home from work. The ABS/ESC and tire pressure lights came on. Actually i do feel occasional pulsating on the brake pedal since taking back my car but brushed it off as the fault lights didn’t come on.
Mechanic also mentioned that there will be a separate fault code for ABS pump if it is indeed faulty, yes no? So far, changed front right sensor 3 times, right wheel bearing and new battery, what else is there?
Below are the fault codes i scanned from Orbit,
1) C003400 - Right Front Wheel Speed Sensor
2) C003411 - Right Front Wheel Speed Sensor. General Electrical Failures. Circuit short to ground.
3) C107593 - Brake Actuator. Component Failures. NO operation.
4) C107908 - Indirect tire pressure monitoring system. Bus Signal / Message Failures
5) U230056 - Central Configuration. System Programming Failures. Invalid / incompatible configuration.
Really appreciate if someone can really point me to the correct point where this frustrating issue can be settled.