04-23-2023, 01:29 AM
(This post was last modified: 04-23-2023, 02:13 AM by FlyingPilot2012.)
Hello all!
My front grill (R-Design) on my XC60 was cracked and in searching for a replacement, I found a great deal on a used R-Design grill with the front camera cutout under the logo. I knew the logo was removable so I figured I could just swap them. But, it turns out the logo casing area on the bumper itself is slightly different due to the camera mounting area. Now I'm wondering about retrofitting the front camera.
My Orbit question concerns the settings for 154 FRONT PARKING CAMERA.
I don't have the 360 cameras (obviously) but I do have the rear camera. Is there any setting that will add just the front camera? I am not sure if just the front and rear cameras were ever an option on this vehicle. I am not interested in adding the side cameras so if I enabled the 360 settings, I assume there would be errors or just blanks views, which I would like to avoid.
Also, does anyone happen to know anything about swapping the bumper harness or direct wiring the camera? I have park assist pilot, so there is a harness in the front bumper but no extra connector for the camera. If I can get the correct harness (and change the setting with Orbit), I assume the camera will work unless there is additional wiring needed from the harness to the CEM.
Appreciate your thoughts!
2018 XC60 R-Design T5
My front grill (R-Design) on my XC60 was cracked and in searching for a replacement, I found a great deal on a used R-Design grill with the front camera cutout under the logo. I knew the logo was removable so I figured I could just swap them. But, it turns out the logo casing area on the bumper itself is slightly different due to the camera mounting area. Now I'm wondering about retrofitting the front camera.
My Orbit question concerns the settings for 154 FRONT PARKING CAMERA.
I don't have the 360 cameras (obviously) but I do have the rear camera. Is there any setting that will add just the front camera? I am not sure if just the front and rear cameras were ever an option on this vehicle. I am not interested in adding the side cameras so if I enabled the 360 settings, I assume there would be errors or just blanks views, which I would like to avoid.
Also, does anyone happen to know anything about swapping the bumper harness or direct wiring the camera? I have park assist pilot, so there is a harness in the front bumper but no extra connector for the camera. If I can get the correct harness (and change the setting with Orbit), I assume the camera will work unless there is additional wiring needed from the harness to the CEM.
Appreciate your thoughts!
2018 XC60 R-Design T5