Retrofit Subwoofer on High Performance w/o Subwoofer

[thorin33]

[quote pid="7415" dateline="1758200423"]


Yes, that's my plan.

I activated sub using orbit but there is no signal at all. I tried both of free pins without luck. Using voltmeter and speaker -> nothing.

I got subwoofer level adjustiment on sensus but that's all. Tried lock doors for 10 minutes, also tried reset AUD and IHU using Orbit. So maybe there is no output for subwoofer in this model of amp.

Next I should find out which wired goes to front doors woofers. Does anybody have wiring diagram for amp like this (5 fins top of amp)? Maybe I have to crap signal there.

The sub channel is dead since an update in about 2020. I pm:d Andrew about reverting AUD-software but no respons yet. I guess his plate is rather full ?

I'll attach the speaker output scheme. Pin 3/11 and 4/12 is front woofer I think

Where are you getting you're REMpower? Or does your amp come with high level on? 

Good luck
[/quote]

Are you saying that the sub channel has been deactivated on te 5 fin amplifier?  Does anyone know if the sub channel can be activated on the 8 fin amp still?  I have a 2020 V60 with the 8 fin amp and was going to pull the trigger on adding the oem HP sub to my system but only if I can activate the sub channel still.

Thanks
Mike