Front parking sensors

[Marcp]

Hi mate,

Each sensor has 3 wires: positive, negative, and signal.

The positive and negative are shared, so there are only 2 wires for all of them.

For the fog lights, you have 1 GND wire that goes to the chassis and 1 signal wire for each light.

In total, with 4 sensors and 2 fog lights, you have 10 wires.

I’m not sure which connector you’re looking at, but the shape doesn’t look familiar to me. The number of pins and wire colors also don’t match the diagram or your connector.

Please double-check it.

Let me know if anything.

Best regards.