Hi
Did you figure it out?
I have another question, do I need to replace the plate to fit the camera? Thats item no K in your picture. It looks like there is a weakening in the plastic that I can remove of my existing plate. Please see picture
Best regardsSir0cco
Ok. So also me I finally made a mess in my XC90.
I have enabled Today the backup camera -> in 2016/2017 models of XC90 the backup camera requires PAC360 module to be installed.
This one is not a simple cable from IHU to backdoor handle. There is a CANBUS unit in between.
It goes like following:
1. cable from IHU (radio) to PAC unit (located under passenger feet) (separate harness - #1)
2. cable from WAM/PAC to power +12V and to CAN bus (secure one, same for BLIS) - harens #2
3. cable to camera in the back door handle - harness #3
4. camera in the handle - 6PIN
Success in a way that IHU sees the unit - allows to turn on the camera view. But the camera window itself is black black.
Has anyone done it already?
The manual says that after installation of hardware - volvo requires a "software reload"
Is this reload only configuration or indeed it is some kind of pairing with the main unit?
Cheers, k.