Thanks to Ted, I think I see what happened. My 2022.5 EGSM connector, already has pins 7, 8 and 9 already wired. I pushed the wires from the steering wheel connector into 11 and 12, which is causing the open circuit error.
![[Image: 55108049562_bb616897db_b.jpg]](https://live.staticflickr.com/65535/55108049562_bb616897db_b.jpg)
Now I need to figure out which of the open pins on the two grey connectors at the base of the center console should get the paddle wires. By doing this, the center console can still be disconnected via connectors without having extra wires direct to the EGSM connector, so a bit more of a factory like finish in the end.
![[Image: 55108054212_76753243b1_k.jpg]](https://live.staticflickr.com/65535/55108054212_76753243b1_k.jpg)
Now I need to figure out which of the open pins on the two grey connectors at the base of the center console should get the paddle wires. By doing this, the center console can still be disconnected via connectors without having extra wires direct to the EGSM connector, so a bit more of a factory like finish in the end.