Hi everyone! Today I successfully installed three lights in the trunk of my Volvo. Originally, it only had one on the right side. I used some 0.5 mm cable and matching light sockets for the project.
Since I couldn't identify the specific pins for the trunk harness(tailgate, te part that opens), I decided to solder the wires directly. I was a bit skeptical about whether it would power all three lights at once, but it works perfectly! Because the wires are all connected, you can tap into them anywhere and run the line to the tailgate connector. No software updates were required. If anyone is interested in doing this, I’m happy to help!
I have included a picture of the connector for the trunk harness( tailgate, the part that opens0)
Since I couldn't identify the specific pins for the trunk harness(tailgate, te part that opens), I decided to solder the wires directly. I was a bit skeptical about whether it would power all three lights at once, but it works perfectly! Because the wires are all connected, you can tap into them anywhere and run the line to the tailgate connector. No software updates were required. If anyone is interested in doing this, I’m happy to help!
I have included a picture of the connector for the trunk harness( tailgate, the part that opens0)
Szigi