01-21-2026, 03:32 PM
(01-21-2026, 12:47 AM)IMAY2023 Wrote:(01-19-2026, 07:36 AM)Henrypanda Hi, I am looking to do what you did to my 2018 XC60. My car also comes with 4 front and 4 rear sensors. I am able to get the extra 2 sensors each for the front and rear, and also the front and rear wiring harness for 6 sensors. My question is do I have to get a parking aid control module and add it to the car? Or just adding the extra sensors, changing the wiring harness and enabling it Orbit is enough to activate self parking? Wrote: The parking sensors on your model / year are connected directly to CEM.
Check this out for wiring and connection. Then from Orbit you can enable or if you are in US, you can purchase Park Assist Pilot from the VIDA which makes it official. The kit in the US did not come with the Harness, I needed to built it myself.
Hi, I’ve looked through the link you’ve provided. Does this mean that I just have to install two more sensors at the front and two more sensors at the rear, then swap out my original wiring harness for both the front and back to the wiring harness for 6 sensors, then I would be able to enable park assist on Orbit? Or do I have to go through all the steps in the link you provided?