Hi All,
I went through a similar topic on the forum (e.g. https://forums.spaycetech.com/showthread...79#pid3579), but unfortunately I couldn’t find an answer to my issue.
I have a Volvo XC60, 2022, AAOS, B4 diesel, mild-hybrid. Using Orbit Config Wizard, I changed the Auto Start/Stop setting to “No Button – Always Off”. Writing the configuration to the car completed successfully. I also made changes related to Driving Aid, which worked fine as well. There are no DTCs or other issues reported.
However, disabling Start/Stop does not seem to work. The car somehow appears to be ignoring this setting. I’ve attached screenshots from Orbit connected to the car.
For reference, Pilot Assist works fine.
Do you have any ideas whether this could be related to this specific engine Start/Stop system, or if there is anything else I could try?
Thanks in advance for your help.
I went through a similar topic on the forum (e.g. https://forums.spaycetech.com/showthread...79#pid3579), but unfortunately I couldn’t find an answer to my issue.
I have a Volvo XC60, 2022, AAOS, B4 diesel, mild-hybrid. Using Orbit Config Wizard, I changed the Auto Start/Stop setting to “No Button – Always Off”. Writing the configuration to the car completed successfully. I also made changes related to Driving Aid, which worked fine as well. There are no DTCs or other issues reported.
However, disabling Start/Stop does not seem to work. The car somehow appears to be ignoring this setting. I’ve attached screenshots from Orbit connected to the car.
For reference, Pilot Assist works fine.
Do you have any ideas whether this could be related to this specific engine Start/Stop system, or if there is anything else I could try?
Thanks in advance for your help.