Oil Level in MM

[glennda5id]

I believe the system is absolute, i.e., it doesn't have anything to do with the level at the last fill. There is a procedure in VIDA to check oil level/volume. It heats oil to 80c, then turns off motor for 10 minutes or so and reports back a value. I ran this last time I did a change.. I assume its just looking at the oil level sensor assuming oil is at proper temp and has had time to drain back to oil pan. Since mine was "low" I kept adding oil and rerunning and it slowly inched up.

Here is screenshot

https://photos.app.goo.gl/nKTH1D6QyEZE4Vy88