11-20-2025, 02:07 AM
(11-20-2025, 01:46 AM)IMAY2023 Wrote:Quote:How should i know or test if my car has the low or medium CEM?Take picture of it. There is label on it. Where "low, medium or high" should be printed.
Quote:I retrofitted 360 and enabled via Orbit and it worked.WAM (360) module is a CAN node and operates independently to CEM. The config you have changed for it just enables the option in IHU
Quote:My headlights are on auto and if i depress the fog light button in day time, the headlights come on (when it shouldn’t cause there’s light). And if I deactivate the fog light, the headlight goes off.This is normal based on the setting you have but it shows that SWM module is communicating and sending the correct message.
So, either your wiring is wrong or your CEM does not actually have the pins to send power to fog lights.
Got it. Only thing I have not checked are the connections from front fog lights and BLIS radars itself. Not sure if the connection there might be the problem.