3 hours ago
This is a known issue. The "new" TRM module (late 2024-up cars) needs a reset after config programming. Which the current release version of OrBit does...but there was a further issue in that sometimes the TRM isn't ready in time after programming, so the reset is missed. This is what causes the problem. 2024 and earlier cars using the older TRM modules, this is not an issue.
The quick workaround is to reset the TRM module: ECU Tools tab-->Select TRM in "Active Diag ECU" dropdown-->Click "Reset ECU" button. That will solve it in the moment.
The issue is solved in upcoming update release. I've confirmed it on a few cars already. Those with the specific issue that would like to try the pre-release for themselves and confirm it is solved, send a message to support(at)spaycetech-dot-com and we can set you up.
The quick workaround is to reset the TRM module: ECU Tools tab-->Select TRM in "Active Diag ECU" dropdown-->Click "Reset ECU" button. That will solve it in the moment.
The issue is solved in upcoming update release. I've confirmed it on a few cars already. Those with the specific issue that would like to try the pre-release for themselves and confirm it is solved, send a message to support(at)spaycetech-dot-com and we can set you up.