Today, 12:03 AM
For heated steering wheel.
The SWM replacement is required because your original SWM does not have the heated steering wheel wires.
Before replacing the SWM, check under functional changes TAB if you have the option "add heated steering" software. Don't order it yet if you see it.
First you will need to replace the SWM module.
Then you connect the VIDA to the car. VIDA might show you both SWM reload and heated steering or only the SWM reload under the HW changes TAB.
If you see both, first order and install the heated steering wheel. Because it might already include the SWM software in it. If that's the case after installation completes, SWM reload will disappear from the HW changes TAB after you refresh the page or perform a fresh readout. You are done!
I replaced my ABS module for installing Pilot Assist and ACC officially. After I replaced it, VIDA showed me two HW changes (BSM reload and Intelli safe PA and ACC). I ordered and installed Intelli Safe and not the BSM reload. After that, BSM reload was gone and I got my PA and ACC officially because it already included BSM, ABS software in it.
I also replaced my IHU with a newer one from a 2022 S60 (used). VIDA showed me two options under HW changes TAB. Market certificate and IHU reload. I installed market certificate because it was $100 cheaper than IHU reload. After that, IHU reload was gone and I could run total upgrade.
If you see only the SWM reload under the HW changes.
First, you will need to order and install it and then from the functional changes TAB you will need to order and install heated steering wheel.
The SWM replacement is required because your original SWM does not have the heated steering wheel wires.
Before replacing the SWM, check under functional changes TAB if you have the option "add heated steering" software. Don't order it yet if you see it.
First you will need to replace the SWM module.
Then you connect the VIDA to the car. VIDA might show you both SWM reload and heated steering or only the SWM reload under the HW changes TAB.
If you see both, first order and install the heated steering wheel. Because it might already include the SWM software in it. If that's the case after installation completes, SWM reload will disappear from the HW changes TAB after you refresh the page or perform a fresh readout. You are done!
I replaced my ABS module for installing Pilot Assist and ACC officially. After I replaced it, VIDA showed me two HW changes (BSM reload and Intelli safe PA and ACC). I ordered and installed Intelli Safe and not the BSM reload. After that, BSM reload was gone and I got my PA and ACC officially because it already included BSM, ABS software in it.
I also replaced my IHU with a newer one from a 2022 S60 (used). VIDA showed me two options under HW changes TAB. Market certificate and IHU reload. I installed market certificate because it was $100 cheaper than IHU reload. After that, IHU reload was gone and I could run total upgrade.
If you see only the SWM reload under the HW changes.
First, you will need to order and install it and then from the functional changes TAB you will need to order and install heated steering wheel.