Drive Mode and Steering Personalization without Switch

[Terence]

Dear all, this is Lieven from Portugal. I just successfully installed drive modes on my (Belgian) 2018 V90CC without drive mode knob and without centre console switch. 
057 to 03
452 to 01
337 to 01
All modes appeared and are working. However the drive mode menu dissapears after 10 seconds or so, the drive mode is displayed on the driver´s screen below the gear indicator. Lost hill descent control, but I think it is worth it. Drive modes are all very different in terms of shifting, accelerator pedal sensitivity, and power delivery. This is a different car. My motivation to engage with Orbit was the lazyness of the automatic gearbox, letting the engine rev without engaging, not taking benifit of the torque zone, especially when promptly accelerating from 1st or 2nd gear.  I will keep you posted on my experience after 500km of driving.

Hi!

I tried these settings to my V90 2017 with no results. My car is Swedish model and without drive mode knob and without center console switch  Only thing I got was an permanent error code and no drive mode options in settings. Are you sure that those three settings alone made your drive mode options working?

Here is what I tried:
   

And with those settings I got this error code and no drive mode options available:
   

I also tried these configurations and with these I got drive mode menu visible in Sensus but I can't see any difference no matter which settings I choose.
   

I also activated power steering personalizations and got menu available but I cannot see any difference no matter which setting I choose. I also activated polestar optimization and I got polestar-settings to menu but still no difference no matter what settings I choose.

Does anyone have any ideas what I should try next? What would happen if I just activate polestar optimization without any other drive mode settings? Functional drive mode menu would still be the best option though.