10-05-2025, 04:03 PM
Hi
I have replace my 8 inch DIM with 12.3 inch and then change parameter 157 to 02 and also activate navigation
and everythings seems to working ok but i get this error code from DIM:
**OrBit DTC Report for YV1PW68BCH1021951 (last read: 2025/10/05 15:24:02)**
DIM-U230056 - 2025/10/05
Central Configuration- System Programming Failures- Invalid / incompatible configuration
12.3 inch DIM come from this car:
YV1PW68BCH1020452 and Art number 31687123
I notice that i had a alarm for air suspension at first startup but after change parameter and restart i have never seen that again, donor car probably have air suspension but i havent..
Must i change some configuration in the DIM? and how?
I have replace my 8 inch DIM with 12.3 inch and then change parameter 157 to 02 and also activate navigation
and everythings seems to working ok but i get this error code from DIM:
**OrBit DTC Report for YV1PW68BCH1021951 (last read: 2025/10/05 15:24:02)**
DIM-U230056 - 2025/10/05
Central Configuration- System Programming Failures- Invalid / incompatible configuration
12.3 inch DIM come from this car:
YV1PW68BCH1020452 and Art number 31687123
I notice that i had a alarm for air suspension at first startup but after change parameter and restart i have never seen that again, donor car probably have air suspension but i havent..
Must i change some configuration in the DIM? and how?