03-21-2023, 05:33 PM
So I got phase 1 of this done...a major update to OrBit is coming soon! It will be included. Phase 1 will be the "calibration prep" step, so I can collect some of the log data from cars, to verify preparing and checking the suspension is ready to measure, works.
It turns out the actual "calibration" itself is rather simple, I had to reverse engineer the data string, but it was not hard to do. Most of the work VIDA does is in the preparation to decide whether you "require" calibration or not.
I'll update once the next update is released and have you guys test it to collect the data so I can verify things are good, then I will make a quick update to add Phase 2, the measurements entry and send the calibration string, with OrBit exclusive lowering or raising feature for those who want that ;-)
It turns out the actual "calibration" itself is rather simple, I had to reverse engineer the data string, but it was not hard to do. Most of the work VIDA does is in the preparation to decide whether you "require" calibration or not.
I'll update once the next update is released and have you guys test it to collect the data so I can verify things are good, then I will make a quick update to add Phase 2, the measurements entry and send the calibration string, with OrBit exclusive lowering or raising feature for those who want that ;-)