08-04-2025, 06:54 AM
(This post was last modified: 08-04-2025, 06:57 AM by nismoboy.
Edit Reason: add content relevant to the topic
)
Thankyou to the creators of the software and to this forum .
I've had the luck of getting a front end damaged volvo xc40 recharge ultimate. have purchased a front end that has Pixel Led headlights . Ive inspected the previous headlamps LED only and found them to have the same pinout for the connector which is great. From what i can tell the vehicle comes with the radar and Camera on the Windshield as well as on the Nose of the Grill .
So in short this should work out .
Now the real questions come .
By default is it possible to code the headlamps using Orbit to the vehicle?
If i do this will the pixel LED still turn on and remain focused ahead as per the factory config on the Headlight control module ? I know these functions are driven by canbus messages and not sure what are the enable commands for park headlight and bright, and if they are universal across the head light control modules LED and LED pixel ? Possibly some canbus snooping might be required .
Following this would be the logical steps of enabling the functions ( not sure where either in the Body control or Vehicle control ) that will provide the Led pixel functions of active sweeping around corners and dipping for oncoming vehicles etc.
Is there any way i can verify this information from those that are more experienced and understand the tech in more detail and what controls which functions where ?
I still have a way to go to reset the SRS unit but i do have a ENET cable from some BMW work i carried out for a friend so a few steps ahead thankfully . Will soon grab a license for the software and get going . Thanks in Advance ...
I've had the luck of getting a front end damaged volvo xc40 recharge ultimate. have purchased a front end that has Pixel Led headlights . Ive inspected the previous headlamps LED only and found them to have the same pinout for the connector which is great. From what i can tell the vehicle comes with the radar and Camera on the Windshield as well as on the Nose of the Grill .
So in short this should work out .
Now the real questions come .
By default is it possible to code the headlamps using Orbit to the vehicle?
If i do this will the pixel LED still turn on and remain focused ahead as per the factory config on the Headlight control module ? I know these functions are driven by canbus messages and not sure what are the enable commands for park headlight and bright, and if they are universal across the head light control modules LED and LED pixel ? Possibly some canbus snooping might be required .
Following this would be the logical steps of enabling the functions ( not sure where either in the Body control or Vehicle control ) that will provide the Led pixel functions of active sweeping around corners and dipping for oncoming vehicles etc.
Is there any way i can verify this information from those that are more experienced and understand the tech in more detail and what controls which functions where ?
I still have a way to go to reset the SRS unit but i do have a ENET cable from some BMW work i carried out for a friend so a few steps ahead thankfully . Will soon grab a license for the software and get going . Thanks in Advance ...