Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Retrofit Subwoofer on High Performance w/o Subwoofer
#37
(05-28-2025, 09:59 PM)BigSpell6466 Wrote:
(04-09-2024, 08:30 PM)x119 Wrote: This might help;

Volvo subwoofer wiring

Repair Terminal
Part Number: 30656645 X2

Receptacle Housing
Part Number: 30669165 X1

Flange screw
Part Number: 999232 X2

Repair terminal
Part Number: 30656639 X2

Hi,
Is the 30656645 the amplifier side, or is it the 30656639?
Which one connects to the amplifier?

Both part numbers are short lengths of wire with pre-crimped wire terminals that you insert into the green multi-pin connector for the amplifier. Then you just crimp or solder your own wire to it and run it to whatever speaker you are connecting to. The difference between them is the wire diameter, 30656639 is for 1.5 mm² wire and 30656645 is for 1.0 mm².

I’m pretty sure only the subwoofer uses 1.5 mm² speaker wire, and the rest of the speakers use 1.0 mm², otherwise someone can feel free to correct me. But it’s not that big of a deal since you can run 1.5 mm² instead of 1.0, just don’t do the opposite.
Reply


Messages In This Thread
RE: Retrofit Subwoofer on High Performance w/o Subwoofer - by Orman - 05-28-2025, 11:51 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)