Air Suspension Calibration

[gabep]

Let me know if you need any more data. I assume the read function is purely diagnostic and I can’t cause any trouble by asking the car for the info?


Sent from my iPhone using Tapatalk

Oh yeah, reading is no problem, doesn't change anything. I am working through the process. One difficulty I'll have to deal with is how the process can go. I think VIDA is drawing the "correct" ride height from service info in VIDA. For OrBit I need to design something useful where we may not have the "official" ride height specs available. Although it maybe not too difficult to add the info for the few models with air suspension, I am thinking we would have possibly only 2 variations: XC60 and XC90, and a third if this works for the rear only V90. But there possibly could be more variations within the models, to account for. 

Does anyone have the service info for the ride height specs for the XC90 or XC60? I don't have them but I know the specs are in the service info, I have them for the S/V60 models. There are only 3 total variations of ride height spec for those: Police, dynamic chassis and sport/Polestar chassis. Across all drivetrains and such, ride height specs are the same so that's promising. I can get VIDA and get them if needed but if anyone already has them...

I can't remember where I got the document below, but the height specs are shown in page four. The doc is for an XC90 but the values are the same for my XC60.