5 hours ago
Orbit does not do any engine and drivetrain tuning or modification. Orbit just changes the configuration in the CEM to enable or disable existing options.
There are other functionalities such as ECU flashing if you have the correct software for the VIN of the car, some service procedures, key programming and etc.
To be clear, Orbit does not flash or program engine ECU or TCM. Polestar config in the Orbit changes only three existing options inside the existing software.
1) Dynamic option is replaced with the Polestar on the center screen,
2) Gas pedal sensitivity setting is changed.
3) TCM (Drive Train) setting is changed. (late shifting)
There are other functionalities such as ECU flashing if you have the correct software for the VIN of the car, some service procedures, key programming and etc.
To be clear, Orbit does not flash or program engine ECU or TCM. Polestar config in the Orbit changes only three existing options inside the existing software.
1) Dynamic option is replaced with the Polestar on the center screen,
2) Gas pedal sensitivity setting is changed.
3) TCM (Drive Train) setting is changed. (late shifting)