04-26-2025, 02:49 AM
If you activate front sensors or Semi Automatic parking without having the front or side sensors, the whole system will not work and you will most like see an error message on the DIM.
But before making such changes that requires additional sensors or modules or wiring, check your CEM. Like mentioned above not all the modules are same. They have different variants such as the CEM. (Low / MID and high) You must have the one labeled high. Low or MID are missing the pins hat front sensors are connected to.
But before making such changes that requires additional sensors or modules or wiring, check your CEM. Like mentioned above not all the modules are same. They have different variants such as the CEM. (Low / MID and high) You must have the one labeled high. Low or MID are missing the pins hat front sensors are connected to.