Retrofit Keyless Entry

[Pliind]

Please help!!!
I've started wiring the rear left door and installed the handle.
I ran the wires, but when I went to connect pins A23 and A8 on the window motor connector, I saw that there was no wire on pin A8.

Please, where should I connect the pins for the handle light?

Hi!
Got your PM, ill answer here to keep all info flowing freely.

So this is why i bought complete new wiring harnesses for all 4 doors, but yeah you have pin 23 that you splice with pin 1,4 (earth) from handle and pin 8 on module to 3 from handle. I don't know the terminals name but my way of solving it would have been a donor harness to extract pins from.