03-29-2025, 06:44 AM
Also worth to check if maybe even the lower level amplifiers have the speaker resistance check function (apoc). If so then I saw that you only check with 1 speaker connected to your output, but if you have the speaker check function in the amplifier then it sees there are speakers missing and shuts down the outputs. In your case if 1 rear speker is missing it will would cut off both rear channels.
I have fiddled around with my 2014 s60 premium sound system and was also fihting with it due to this issue. Then needed to add an Helix AAC conversion to activate the original Amplifier outputs to get sound (needed to get inputs to my new amplifier through the existing one).
Just worth to check and it should be easy to connect 2 speakers instead of 1.
I have fiddled around with my 2014 s60 premium sound system and was also fihting with it due to this issue. Then needed to add an Helix AAC conversion to activate the original Amplifier outputs to get sound (needed to get inputs to my new amplifier through the existing one).
Just worth to check and it should be easy to connect 2 speakers instead of 1.