03-26-2025, 01:40 PM
FYI, this is a Volvo/Polestar bug in 3.4.4 system update. The CEM is looking for the config item to be set, but the current software on the CEM does not set that config item.
You can safely ignore it, or you can try setting it, to make the config error go away. It's a new config item, I don't know what "turn indicator intensity" is yet, but safe to assume the "01 Standard..." setting is the safest bet.
Setting back to "00" is a problem in OrBit, as it is not really a setting value, it is the undefined value of a config item that is not used. But you CAN get back to the original undefined value, if you "Restore to OEM" config.
Having a problem writing the config, is totally unrelated to what config item you have changed. You are having a general programming problem. You may want to look at the troubleshooting guide for connection issues when programming: https://forums.spaycetech.com/showthread.php?tid=225
If that doesn't help or doesn't describe the problem you have, send a message to support(at)spaycetech<dot>com we will help you to get things working!
You can safely ignore it, or you can try setting it, to make the config error go away. It's a new config item, I don't know what "turn indicator intensity" is yet, but safe to assume the "01 Standard..." setting is the safest bet.
Setting back to "00" is a problem in OrBit, as it is not really a setting value, it is the undefined value of a config item that is not used. But you CAN get back to the original undefined value, if you "Restore to OEM" config.
(03-26-2025, 03:05 AM)silentacoustics Wrote: I’m new to Orbit and having the same issue. In my case however, it is not writing to car the 331 change.
It’s saying CEM is not ready for programming, then reconnects.
I’m not sure what I’m doing wrong.
I’ve added the CEM PIN and reran update profile.
I’ve cleared DTCs.
I’ve reset ECUs.
I’ve unplugged the battery for 6 minutes and tried it all again.
I’ve tried restore OEM
It’s also stating no VGM Detected.
I have a s60 2024 with AAOS so I’m not sure what I’m doing wrong.
Having a problem writing the config, is totally unrelated to what config item you have changed. You are having a general programming problem. You may want to look at the troubleshooting guide for connection issues when programming: https://forums.spaycetech.com/showthread.php?tid=225
If that doesn't help or doesn't describe the problem you have, send a message to support(at)spaycetech<dot>com we will help you to get things working!