03-14-2025, 05:49 PM
If you have enabled the 210 SUBWOOFER, disable it. Because according to the picture, you do not have SUB output on PIN7.
You did not mention if you tested all the outputs but start from the PIN2 which is the center output. Put the Fader and Balancer in the center, and test. You should hear something. I know it's dumb question but according to the picture, I do not see "play" symbol at the top in the pictures. Are you sure you are playing something?
If you still do not hear a sound on PIN 2.
Put the setting 028 RADIO, AMP AND SPEAKER SYSTEM to 01 and retest. If still nothing then put the setting 028 RADIO, AMP AND SPEAKER SYSTEM to 04.
Once you can hear from PIN2 (center) test the other outputs (1, 3, 4, and 5) while playing with the balance.
I have the xc40 CMA wiring but yours is SPA and wiring is different. (according to the pictures).
You did not mention if you tested all the outputs but start from the PIN2 which is the center output. Put the Fader and Balancer in the center, and test. You should hear something. I know it's dumb question but according to the picture, I do not see "play" symbol at the top in the pictures. Are you sure you are playing something?
If you still do not hear a sound on PIN 2.
Put the setting 028 RADIO, AMP AND SPEAKER SYSTEM to 01 and retest. If still nothing then put the setting 028 RADIO, AMP AND SPEAKER SYSTEM to 04.
Once you can hear from PIN2 (center) test the other outputs (1, 3, 4, and 5) while playing with the balance.
I have the xc40 CMA wiring but yours is SPA and wiring is different. (according to the pictures).