03-04-2025, 12:47 PM
(03-04-2025, 08:17 AM)cristiavram_a Wrote: Bumping this topic, maybe someone found new info about transmission relearning/ adaptation procedure. I've change the oil and the mechanic started the relearning procedure but unfortunately was too short because I had to go home quickly. If engine is shut off the procedure ends..
I have run adaptation process after oil change with AUTEL. Procedure says You need to accelerate slowly on each gear, there is information on dash board "transmision in adaptation mode" and gears shows as D1, D2, D3, D4, D5, D6, D7, D8 after transmission run all 8 gears information "adaptation completed" appear and adaptation proces is finished. Then i stoped, turn off and on engine and thats all.