(02-03-2023, 08:27 AM)krounchou Wrote: 023 CRUISE CONTROL - 01 WIth Cruise COntrol ===> should I go to 03 (ACC level 1) or 04 with Stop and Go ? I wonder what it does. I Think 2022 models are able to do that
238 TOP DAMPING BRAKES - 01 Friction brake actuator without top damping ==> That's where I am doubting if according to Power6 I should not touch it or match Gabep config and go to 02
314 ADAPTIVE CRUISE CONTROL VERSION - 01 ACC Version 1 ==> I struggle to understand this one. It's the same value at Gabep yet I have no ACC on mine, only regular cruise control , not sure if I shall change that to get Pilot Assist
Thanks all, great to exchange about the config ! Curious to see if a 2022/23 model with PA / intelissafe can share its config
It's probably good to get some confirmation...from a hybrid (BX or T8) car with PA equipped, what is the top damping set to. I suspect that setting matters for non-hybrid only, but some confirmation would be good. I could always be wrong!!
On 314, I think this is typical, my 2019 S60, no ACC/PA from factory, is the same "01 ACC Version 1" . It may be this denotes the "system" that is installed, but PA/ACC, stop and go features being enabled, those are done by other settings.
I think as the first step, try the lowest level we know, per my first post the settings to get the basic PA/ACC features, and see how that works.