02-23-2025, 11:18 AM
(05-05-2024, 12:20 AM)IMAY2023 Wrote:Now that I’ve gotten myself new seats, I put my original ones up for sale and found a buyer.(05-04-2024, 11:42 AM)Oscarv90raggarn Wrote: Hey everyone. I tried to switch from semi electric seats to full electric seats in my s90. Sadly it wasnt plug and play. Ive tried reading through the forum 100 times but i cant seem to find anyone that had the same problem.
I looked att the old semi electric seats connector. Where i have the following pins, 16, 22, 23, 32.
The new seats have 15, 16, 22, 23, 29, 30, 31, 32. So i am missing 4 pins.
Has anyone done This? Where do i have to get the new pins from? Im guessing that there is some sort of CAN cabels needed. Where do i get This signal from if thats the case.
Any answers are apriciated since i really want This to work. Best regards, Oscar.
Here is the S90 diagram. You are missing the CAN low, CAN High, power and LIN.
The buyer has a V90 with half electric, non memory seats but with heating. The seats that I’m selling are full electric with memory (both sides) and with 4way lumbar.
Have I understood correctly that for them to work I would just need to tap into the can hi and can lo wires from the door loom to make the adjustments work? How about the memory? The buyer has alreary bought door cards with memory buttons but I assume there’s no wires there as he still has the original door card loom that came with the car.
And how do I know what wire to splice into in the door loom? I’m terrible at reading wiring diagrams..