Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Enabling Navigation System
#3
I would like to contribute to the community by saying that it is also possible to update Sensus maps by using a specially prepared USB external hard drive if you have such lying around, not only by using a USB flash drive. Furthermore - sometimes if one buys a 64GB USB flash in the shop, it might have an actual capacity of less than 57GB, to fit the whole Europe map on it (I had such a situation).

USB hard drivesĀ  (in my case - WD My Passport Ultra) have large capacities, e.g. 2TB. Those for some reason might not be recognized and read properly by Sensus. Therefore one must clean the hard drive of all partitions and create a BMW boot record (GPT will not work), and a single reasonable partition, I tried 64GB.

That can be done (if using Windows 10+) by connecting the external hard drive to it and running the following commands in the command prompt:

Run the tool:
diskpart

List all disks in the computer:
list disk

Identify and select the right (very important!) external disk (e.g. 1, 8 etc.) for further actions:
select disk X

Next:
clean
convert mbr
create partition primary size=65536
format fs=ntfs quick
assign
active
exit

The disk should show up under "My Computer" and the Volvo map downloader should be able to find it.
The next steps are as per other tutorials explaining map updating.
Reply


Messages In This Thread
Enabling Navigation System - by kerim - 02-09-2025, 05:12 PM
RE: Enabling Navigation System - by IMAY2023 - 02-10-2025, 09:15 AM
RE: Enabling Navigation System - by volver - 02-15-2025, 07:55 PM
RE: Enabling Navigation System - by kerim - 02-24-2025, 05:26 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)