01-31-2025, 09:09 PM
(01-26-2025, 11:59 PM)UncleGurm Wrote: However, the procedure in the ECU tools (setting to IHU, reading EF75, and sending the code to disable) didn't work for me on my vehicle (Andrew had said it may only work on SENSUS vehicles). But now there is apparently this "additional service procedures" option you've posted, so I'm going to give that a try, I think. But wonder if it'll even run? That's why I'm curious what happened when you ran this procedure?
FYI for you, the same procedure I had you try manually, is what this Service Procedure is. I just made the easy way to run it. But it does appear we found that the AAOS IHU doesn't support this particular Data ID.
It is not too clear the relationship between config and this field on the Sensus IHU, but it was possible to change it, and one fellow testing amplifier output with some signal tester, had found that the noise cancelling/enhancing audio was in fact disabled by writing this DID to the IHU. So it's there to be used. For Sensus IHU anyways...