01-28-2025, 03:57 AM
2019 V90CC, so I'd installed SCHRADER 28304 sensors and changed configuration in OrBit to enable direct TPMS.
Changed settings for 019 / 020 and 267. Also used Autel TS508WF to confirm, that car remote is operating on 433 MHz.
and Autel reads data from all sensors i.e. pressure/temperature and battery status.
I want to enter sensors ID using OrBit as pressures are still not displayed in Sensus. When trying to enter sensors ID from Schrader, OrBit is not allows to enter it with message about HEX format.
Anyone knows the example of IDs that I want to replicated, as OrBit display 0000 for each sensor and ID from Schrader is much longer.
Changed settings for 019 / 020 and 267. Also used Autel TS508WF to confirm, that car remote is operating on 433 MHz.
and Autel reads data from all sensors i.e. pressure/temperature and battery status.
I want to enter sensors ID using OrBit as pressures are still not displayed in Sensus. When trying to enter sensors ID from Schrader, OrBit is not allows to enter it with message about HEX format.
Anyone knows the example of IDs that I want to replicated, as OrBit display 0000 for each sensor and ID from Schrader is much longer.