11-26-2024, 04:17 PM
(This post was last modified: 11-26-2024, 04:25 PM by Preparaator.)
Hi!
I have v60 T8 2021 and same issue.
Was able to connect without problems few months ago and now it does not connect.
"Requesting connect
Waiting for connection...
Found car
Connecting to IP: 169.254.1.113
Gateway ECU: 0x1001
Waiting for the gateway to respond...
No cars found! Check cable, replug OBD connector, or check local firewall blocks OrBit from incoming connections
Error Reason: timeout
OrBit Disconnected"
I checked my firewall rules, added 2 more inbound rules(had only two rules before) as described above and also .exe rule. Tried - ignition on, car running, door open, door closed - no success to connect to the car.
Any ideas?
Edit: using Enet cable
I have v60 T8 2021 and same issue.
Was able to connect without problems few months ago and now it does not connect.
"Requesting connect
Waiting for connection...
Found car
Connecting to IP: 169.254.1.113
Gateway ECU: 0x1001
Waiting for the gateway to respond...
No cars found! Check cable, replug OBD connector, or check local firewall blocks OrBit from incoming connections
Error Reason: timeout
OrBit Disconnected"
I checked my firewall rules, added 2 more inbound rules(had only two rules before) as described above and also .exe rule. Tried - ignition on, car running, door open, door closed - no success to connect to the car.
Any ideas?
Edit: using Enet cable