11-18-2024, 08:21 PM
First check if you can connect to internet via TP-Link USB to Ethernet adapter, this would make sure that you do not have any driver problems.
Then, check the inbound firewall rules, (windows defender with Advanced security)
You should have 4 inbound rules.
Local Address > ANY
Remote Address > ANY
Profile> (public, private and domain)
Protocol > TCP; LOCAL Port >ANY; Remote Port > 13400
Protocol > TCP; LOCAL Port >24200; Remote Port > ANY
Protocol > UDP; LOCAL Port >13400; Remote Port > any
Protocol > UDP; LOCAL Port >24200; Remote Port > ANY
Outbound rules:
Usually Firewall does not block any out pound TCP and UDP ports but it can block executables "OrbitRun.exe" You can add a outbound rule and allow the orbit.
connect the VOE adaptor to the car, turn the ignition on pos 2 without engine is running. Make sure on the TP-Link USB to Ethernet adapter you have the link lights on.
Launch the Orbit and try again.
Then, check the inbound firewall rules, (windows defender with Advanced security)
You should have 4 inbound rules.
Local Address > ANY
Remote Address > ANY
Profile> (public, private and domain)
Protocol > TCP; LOCAL Port >ANY; Remote Port > 13400
Protocol > TCP; LOCAL Port >24200; Remote Port > ANY
Protocol > UDP; LOCAL Port >13400; Remote Port > any
Protocol > UDP; LOCAL Port >24200; Remote Port > ANY
Outbound rules:
Usually Firewall does not block any out pound TCP and UDP ports but it can block executables "OrbitRun.exe" You can add a outbound rule and allow the orbit.
connect the VOE adaptor to the car, turn the ignition on pos 2 without engine is running. Make sure on the TP-Link USB to Ethernet adapter you have the link lights on.
Launch the Orbit and try again.