Bending Lights and Active High Beam

[IMAY2023]

The factory settings for ABL are below.


106 HEADLIGHTS TYPE - 0B LED, with Bending Light, Type A, with HCM US/CND High Range
109 ACTIVE HIGH BEAM - 03 With AHB1 (On/Off), High Beam in Small Village
256 BENDING LIGHT - 03 With Bending Light in High and Low Beam


I messed up mine got bunch of HMLR / HMLL codes. took several steps to get rid of them. 
I don't have  LED, with Bending Light, Type A, with HCM US/CND High Range but I just wanted to try with those settings. 

Since you actually changed the lights. So, maybe try one by one. 


First clear all the DTCs. 
Then, 

106 HEADLIGHTS TYPE - 0B LED, with Bending Light, Type A, with HCM US/CND High Range
109 ACTIVE HIGH BEAM - 03 With AHB1 (On/Off), High Beam in Small Village
256 BENDING LIGHT  > without (since your car did not have those. 

After programing, clear again all the DTCs. 
right after that turn off and lock the car. Wait at least 10 minutes. 

Then 
Check and clear all DTCs. 
Change (program) 
256 BENDING LIGHT - 03 With Bending Light in High and Low Beam

Check and clear all DTCs. 
right after that turn off and lock the car. Wait at least 10 minutes. 

Check if bending lights works. 

I hope this helps you and you get your bendy lights.