10-23-2024, 07:32 AM
@Jerma75: that's weird that you get an error. Indeed the setting 238 Top Damping should not be adjusted when you don't change the Hydraulic unit.
This morning I was able to test the Stop & Go level 1 and it works perfect!! Tested it with ACC and Pilot assist in 2 small traffic jams. Car is stopping to 0 and then drives automatically. Didn't had to push any button but the car stood only still for 2/3 seconds max.
So for everybody that want to use ACC/PA in traffic jam use the Stop & Go level 1 function (I have a MY2019 T5).
You also have level 2, 3 and 4 if I'm correct but don't know what the difference is exactly.
This morning I was able to test the Stop & Go level 1 and it works perfect!! Tested it with ACC and Pilot assist in 2 small traffic jams. Car is stopping to 0 and then drives automatically. Didn't had to push any button but the car stood only still for 2/3 seconds max.
So for everybody that want to use ACC/PA in traffic jam use the Stop & Go level 1 function (I have a MY2019 T5).
You also have level 2, 3 and 4 if I'm correct but don't know what the difference is exactly.