Enabling Pilot Assist and Adaptive Cruise Control

[Jerma75]

Hi,

A member from Volvo forum (NL) told me to put ACC to 04 acc with stop & go level 1.

I have adjusted this and will test it tomorrow and will update here.

On my car V60 2021 D3 AWD, the setting 023 - Cruise Control was suggested by the preset configurator to be set to 04.

NOTE: I today configured keys to my car and read the error codes at the same time. There was one for the changed items:

ERROR CODE:
BCM:
U2108 - Adaptive Cruise Control - System Programming Failures- Invalid / Incompatible configuration.

The error code keeps coming back on next drive. ACC and PA are working fine without any issue.

EDIT: Changed config slightly:
023 to 03 (Adaptive Cruise Control, level 1).
145 to 01 (Without traffic jam assist)
148 to 01 (Without curve speed warning, without curve speed assist)
RESULT: As expected PA no longer available. Adaptive Cruise control works fine, disconnects when speed goes below 30km/h. No error codes.

BTW, i had the setting 238 - Top Damping, Brakes as set to 01 (without top damping), and i left it as such even the preset suggested to go for 02 with top damping.