(10-10-2024, 08:00 PM)IMAY2023 Wrote: You cannot deactivate the seat track sensors because they are part of the SRS system and your current SRS software needs them to operate.
So, take out the sensors from your old seats and put them on the new seats.
You mentioned that you took seats from right hand drive car and put them in left hand car.
I think the problem might be with 244 Remote passenger seat control. for the
PSMD:
U2300 - Central configuration - System programming failures - Invalid/ incompatible configuration;
Disable it and test again.
Second,
As far as I know, that seat menu only shows up after enabling the massage seats.
Disable the massage seat and cushion extension on the passenger seat.
Then only enable the cushion extension on the passenger seat and test. After that enable the massage seats.
This post is near truth. Updates:
First question with sensors - Solved. Moved sensors from Momentum seats to Inscription.
Second question - PSMD - fault gone. What I did: Disabled 244 feature.
Third question. No Luck. Tried according your written process, but in end result same as it was.