Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Enabling Pilot Assist and Adaptive Cruise Control
#67
(02-02-2023, 04:37 PM)Power6 Wrote: This is a common one so I will kick off with the general guidelines and others can chime in as more is learned!

If you have OrBit supported Volvo with regular cruise control, AFAIK all these SPA/CMA Volvos have the sensors and equipment for PA and ACC to work, as those are already used by the safety systems. The software on all the modules also appears to be the same stuff whether you have PA/ACC or not. So enabling these items is a matter of config in OrBit!**

There are multiple items that comprise enabling PA/ACC and it can be confusing. What I will describe is the "lowest common denominator" settings for enabling PA below, which will include ACC when done:

023 CRUISE CONTROL - 03 Adaptive cruise control, level 1
145 TRAFFIC JAM ASSIST - 04 With Traffic Jam Assist, Level 3
238 TOP DAMPING BRAKES - 02 Friction Brakes actuator with top damping (change this only non-hybrid car)

If you are "confused" just do the above. This enables Pilot Assist on my 2019 S60 T6 that did not have the Advanced Package. Many people than ask what "top damping" is, and I have no clue ;-) Just that non-hybrid cars with Pilot Assist have that enabled (and see ** below). For hybrid cars, I would leave that setting at what it is orginally, since the "brake by wire" system is known to support PA as it is.

NOTE YOU MUST ALSO RUN "ABS CLEAR CONFIG" FROM THE SHORTCUTS TAB AFTER YOU CHANGE AND WRITE CONFIG WITH THESE ITEMS. Glad we got that out of the way. In future update OrBit will do this automatically for the items tha we "know" need the ABS clear config run. For now, just remember to run it after you change config.

If you want to play with settings further there are a number of additional features and "higher levels" of PA/ACC you can play with, see if they work. It is not clear what cars "support" these features, I'll share my experiences to kick it off (2019 S60 T6 R-Design)

142 PARKING ASSISTANCE - I have "03 Park Assistance, rear and front" as original. Autmated parking settings are in this item. Enable on my car (04, 05) gives messages in dash about "parking assistance unavailable" and trouble codes set for missing side parking sensors...
148 CURVE SPEED SUPPORT - I can enable and the items show upin dash and Sensus to use this, but never has worked from what I can see
149 ROAD SIGN INFORMATION - I've changed this to version "with SLA" to support Curve speed assist above (0F for USA) but that still does not work
155 SPEED WARNING - Disabled on my car original, I have enabled, this works
312 LANE CHANGE ASSIST - this does not work on my 2019 S60, not automated lane change. 
314 ADAPTIVE CRUISE CONTROL VERSION - Mine is "01 ACC Version 1" I have not tried changing this

023, 145 changing to higher "levels" - On my car, moving these up to higher than the settings I noted above, then write, ABS clear etc. I get messages on the dash of ESC, Cruise Control disabled etc. So does not work for me. Newer Volvos "with Pilot Assist" maybe well have the hardware to support the higher levels, I don't know. That's where the community and trying and learning comes in....

** Volvo offers or has offered the "Intellisafe Assist" accessory for cars without PA to get it. On non-hybrid cars, they require a new ABS pump unit to be installed. It seems that a different unit was needed for the non-hybrid cars to have Pilot Assist. Not too much is known, other than this may be the unit with "top damping" we see in config. At any rate, while the software is there, and you can enable PA on an ICE model...Volvo doesn't support that without the ABS pump swap. We know it does work and has been fairly common to do, no known issue, but you should know it's AT YOUR OWN RISK! Personally I don't mind, I was curious about PA/ACC so enabled it, but I don't use it very much anyways

Hi, 

For  142 PARKING ASSISTANCE  with SEMI AUTO, you will need to install 4 sensors. Instructions. (I did it myself. Volvo no longer sells the wiring harness but I wired myself into CEM.  See the enclosed. 
148 CURVE SPEED SUPPORT - according to VIDA, this works mostly on highways only with ACC or Pilot Assist.  (set to 4)  
149 ROAD SIGN INFORMATION - works perfectly. You'll get third option , you'll need both 149 and  036 Adjustable Speed limit. Put them 0F and 03 respectively.  
314 ADAPTIVE CRUISE CONTROL VERSION -  I tried version 4, it seemed to me ACC was bugy.  
312 LANE CHANGE ASSIST - I could not find any info about this for any model and year. It might be usable with 494 - HIGHWAY Assist. My S60 2016 T5, did not have pilot assist. I installed it myself following this guide (replacing the hydraulic unit then installing app 32207072 from VIDA.)  After that my factory setting of  494 - HIGHWAY Assist was 00- Unknown Value.  I tried with 2 but it seems not working. I have not mess around other unknowns in the drop down. 

I'm going to try  155 SPEED WARNING,  mine is also disabled but I still get speed warning ding (above 5 miles/h) if I set it from sensus. 
 


Attached Files
.pdf   FRONT_SENSORS.pdf (Size: 254.88 KB / Downloads: 62)
.pdf   REAR_SENSORS.pdf (Size: 245.83 KB / Downloads: 30)
Reply


Messages In This Thread
RE: Enabling Pilot Assist and Adaptive Cruise Control - by IMAY2023 - 03-02-2023, 12:04 AM
RE: Enabling Pilot Assist and Adaptive Cruise Control - by ElHeavy1987 - 02-04-2024, 06:31 PM
RE: Enabling Pilot Assist and Adaptive Cruise Control - by ElHeavy1987 - 02-05-2024, 09:34 AM

Forum Jump:


Users browsing this thread: 14 Guest(s)